The installation position of the top of the sliding door of the closet is generally on the door leaf, around the frame fan or on the sealing bridge (wind block) to enhance the seal between the frame and the fan. The specifications of the top are an important factor that affects the watertight performance of sliding doors and windows, as well as An important factor affecting the opening and closing force of doors and windows. Excessive specifications of tops or high vertical hairs will not only be difficult to assemble, but also increase the movement resistance of doors and windows, especially the initial resistance when opening and the final seating resistance when closing. Small, or the height of the vertical top is not enough, it is easy to fall out of the groove, which greatly reduces the sealing performance of doors and windows.
The installation of the wardrobe sliding door top requires a screwdriver and a paper knife, and then pay attention to observe that there are holes on the upper side of the sliding door frame, one on top and one on the top. First tear off the sticker on the top, insert a section into the upper hole, and then press the frame to stick it down until the bottom hole, then cut off and plug a part of the top into the hole, so that it is not easy to take off
Post time: Aug-03-2021
