Fixed household appliances:
At the bottom of household appliances, such as the bottom of a phone, a small piece of weather strip for doors and windows is stuck to prevent the appliance from sliding.
Wrapping tool handle:
Door and window rain cover, weather strips, common sense of life, the magical effect of door and window weather strips
Some household tools, such as hammers, axes, wrenches, etc., have several layers of weather strips wrapped around their handles, which can protect the handles and make them more comfortable to hold and easier to hold.
Repair effect:
After the rubber gaskets on the edges of the doors and the trunk of the car are recessed, they should be filled with weather strips for doors and windows for repair. If the weather strip on the car window is damaged, it can also be repaired with a small piece of door and window weather strip to prevent wind and rain from pouring into the car.
Enhance the anti-skid force of the bottom of rubber shoes:
Cut the door and window weather strips into pieces and stick them to the bottom of rubber shoes or rubber boots, especially the heel, to avoid slipping.
Windshield wipers are also called wipers, wipers, wipers or windshield wipers. They are used to wipe off raindrops and dust attached to the windshield of a vehicle to improve the visibility of the driver and increase driving safety. Because of legal requirements, almost all cars have windshield wipers. Wipers are also installed on the rear windows of vehicles such as hatchbacks and SUVs. In addition to cars, wipers are also installed on other transportation vehicles, such as trains and trams. Certain engineering machinery and tools, such as cranes, are also equipped with windshield wipers. What are the common reasons why the wiper does not clean the glass?
Wipers
1. The glass is not clean
Usually, the glass is not cleaned properly in the car wash, and the surface of the glass is stuck with fine asphalt particles, etc., which will reduce the smoothness of the glass surface. The rough glass surface will not only be scraped cleanly, but will also damage the wiper strip.
2. The wiper strip is rough
If the original wiper rubber strip is properly maintained, its lifespan can reach 5 years. It should be noted that the fine sand particles on the wiper strip should be removed in time. Wiping with these fine sands is equivalent to polishing the wiper strip with a grinding wheel. After a while, the finish will drop, and the frizzy tape will not clean the rain.
If you find that the wiper is not clean, most of it is because of improper maintenance. The reason for the roughness of the wiper rubber strip is to find a way to polish the rough rubber strip smoothly. So, how to restore the wiper as new?
1. First remove the two wipers
Generally speaking, the common type of wiper, by turning off after resetting, when the car is stopped, manually pick up the wiper, and then take it out in the opposite direction. This way of retreating and advancing is to install the wiper. The method is also a technique for removing the wiper.
2. Prepare a piece of water sandpaper
Buy a piece of water sandpaper, tear the water sandpaper into small pieces, and use one small piece at a time.
3. Soak the wiper and water sandpaper with clean water
Fill a suitable container with water, soak the wiper and water sandpaper in the water.
4. Polish the wiper strip with water sandpaper
Note that the rubber strip is like a knife. Not only do you have to grind the two sides, but also the front side of the rubber strip appropriately. The time does not need to be long, about 5 minutes will do.
Post time: Mar-17-2021
